PRAECLARUS

Using a very fine support cable System Praeclarus can create curved patterns of light floating in space

The support cables can be arranged in parallel or as an XY mesh

LEDs secure the cable crossing obtaining an

electrical connection and holding the junction

in place facilitating the creation of 3D curved formations

Up to 170 Praeclarus LED units can be fitted on a single cable

In XY mesh configurations the cables in one

axis are all connected to ground

A given power unit will supply a number of cables running along the other axis

Main features

• Compact unit just 43mm diameter

• Clear, smoked or white diffused cover options

• Available in three intensities

• Available as single colour, RGB or RGBW

• Super smooth fading with linear LED current control (not PWM)

• Easy installation with no electrical connections to LED unit

• Up to 170 LED units controlled from a single power unit

• Polarity insensitive

• Protection included to prevent failure of a single LED unit compromising the whole system

• Designed and manufactured in the UK

RM200 and RM500 power units provide the DC supply and combined power and data to control lamps or LED units

The power units accept DMX data converting this to the special combined power and data format

Power units have DMX record capability for standalone operation

They can also be programmed using Glasson Electronics' show creation software

As with all Glasson Electronics products, power units are designed and manufactured in-house

• Protected from lamp wiring faults

• DMX data input

• DMX record/playback facility

• Universal 90/264VAC input

• Power consumption 260W (RM200) 600W (RM500) max

• Comprehensive self diagnostic system

• 100M max festoon cable length

• Size 246 x 200 x 75mm (RM200) 230 x 300 x 75mm (RM500)

• Weight 2.4Kg (RM200) 3.2Kg (RM500)

• 40C maximum operating temperature

A commissioning and maintenance tool, the hand programmer facilitates quick programming of an LED / Lamp holder units address

For DFS1000 and 3000 the LED unit is briefly attached to the hand programmer to set the address

For DFS200 the lamp holder is temporarily inserted into the lamp socket in place of the lamp

For Orbis, Praeclarus and DFS4000 a different version programs the LED unit address using a short range infra red link

The hand programmer can also read an LED units address and invoke an LED test

Programming typically takes 4 seconds