spacer
Glasson

SOPHISTICATED LIGHTING EFFECTS - MADE SIMPLE!
dfs1000_banner0202

DFS1000

 DFS1000 is the lowest cost product in the range. The system provides independent control of up to 200 single colour LED units on a common cable from a single power unit. The system comprises high brightness single colour LED lamp units. The lamp units are available in a wide range of colours including cool and warm white. Warm white is particularly effective for emulating tungsten lights. DFS1000 has recently been improved to provide full 8 bit intensity control when operated from DMX.

SYSTEM COMPONENTS

DFS1000 LED UNIT

The DFS1000 LED unit looks like a standard ES lamp. The globe measures 55mm diameter. The units feature excellent environmental protection and are suitable for use outdoors. LED units include six single colour LEDs When operated from DMX the system gives full 8 bit intensity control.The units feature true linear current control (not PWM) to give excellent flicker free colour when viewed with a video camera.

The maximum length of cable is 100M although a number of cables can be run in parallel from a given power unit.

 

LED UNIT MAIN FEATURES

  • Standard ES base.
  • Full intensity control.
  • Excellent environmental protection.
  • Robust plastic globe.
  • Failure of one LED unit will not compromise operation of the rest of the system.

DFS1000 POWER UNIT
dfs3000_lamp02

DFS1000 LAMP UNIT WITH STANDARD LIGHT FITTING.  55mm DIAMETER

The DFS1000 power unit operates from 230 or 110VAC and controls up to 200 LED units via a single two conductor cable. The system accepts LED control information from DMX or can play user created sequences from the built in memory card with our special control software to provide standalone operation. Standalone operation is not limited to 200 LED units because the system includes a special power unit synchronizing system which can time coordinate virtually any number of power units even over long distances. For outdoor applications an environmentally protected version is available with an IP66 rated polycarbonate enclosure.

POWER UNIT MAIN FEATURES

  • Standard DMX data input.
  • Standalone operation possible with ADFS software supplied free of charge.
  • Simple single cable system.
  • Controls up to 200 LED units.
  • Protected from wiring faults.
  • Measures just 280 x 245 x 60mm.
  • Environmentally protected version available.

 
dfs3000_powerunit02

THE COMPACT DFS1000 POWER UNIT CONTROLS UP TO 200 DFS1000 LED UNITS

HAND PROGRAMMER

The hand programmer is a commissioning and maintenance tool used to set the address of each LED unit. To Program an LED unit simply plug it into the handprogrammer as it would be fitted to a lamp holder.

Programming is performed as part of system commissioning. Once the address is set the programmer automatically increments to the next address. The whole process takes just a few seconds.

  The programmer can also read an LED unit address and initiate a simple test of the LEDS to verify correct LED unit operation. LED units can be reprogrammed thousands of times without damage.

 
Glasson Electronics (9 amended)09

GLASSON ELECTRONICS LTD, HARBOUR HOUSE, EAST QUAY, GLASSON DOCK, LANCASTER, ENGLAND. LA2 0BU. TEL 0044 1524 752208. info@glassonelectronics.co.uk

All information on all pages of this website is Copyright Glasson Electronics Ltd and must not be reproduced in any way without permission from Glasson Electronics Ltd.